Other

For optimal aerodynamic position. - Only compatible with Speed Concept - Please consult assembly manual before attempting service - Sold individually

For optimal aerodynamic position. - Only compatible with Speed Concept - Please consult assembly manual before attempting service

Don't be left hanging. - Universal Derailleur Hanger - or UDH - offers greater derailleur protection - Designed to rotate rearward in event of an impact - Works with all drivetrains - 30mm washer provides full coverage over ABP bearing seals - Included attachment hardware is reverse threaded

Adapters to convert your rear flat mount frame to post mount caliper - FR1-R140 = rear 140mm rotor - FR2-R160 = rear 160mm rotor - Each includes two 32mm bolts

Flat mount rear adapter for a 160mm rotor

- DT Swiss cartridge bearings - Sold in pairs

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Sunlite replacement cartridge bearings - Sold in pairs

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-R9120 levers

If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-9150 Di2 levers

Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm

Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts

Flat Mount Disc Caliper Bracket Bolts

GX Eagle Rear Derailleur Pulley Kit

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Replacement hoods for SRAM hydraulic shifter/brake levers.

RockShox Reverb Service Kit includes foam ring, inner seal head bushing and O-rings

DebonAir air spring assembly to update Yari and Lyrik forks.

- Ergonomic 1x lever - Compatible with the Turbine and Aeffect Dropper Posts - Standard shifter cable and housing

Replacement pads for the F-40 armrest. - F-40 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover

The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: 60mm to 70mm in 5mm increments (with aftermarket Riser Kit) - Extension length and rotation can be easily adjusted using the top bolt - Weight: 545g

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

FSA Standard Headset Bearings

OPEN BOX: Like NEW - Damaged/Missing Packaging ABI Standard Design Cartridge Bearings. - 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals - If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed Specifications: - Thickness: 8 - Material: Steel - Bearing O.D. (mm): 26 - Manufacturer Number: 6000 - Bearing I.D. (mm): 10

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements.

Genuine replacement parts The chainguard you need. Get back on the road with a genuine replacement chainguard. - Original equipment replacement chainguards for Electra Townie Original bikes - Color matched for direct compatibility

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6805 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. - Allows for easy installation on Rock Shox Torque Cap compatible forks

OPEN BOX: Like NEW - Damaged/Missing Packaging All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

Genuine Replacement Parts Get your bike back on the trail with the parts you need. Product details: - Precision-machined aluminum construction - Precision cut to ensure proper headset function - Sold in packs of 3

Replacement arm pads that provide support, comfort, and confidence for riders in the aero position.

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Madone KVF Aero Integrated Bar/Stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Upgrade or refresh your Bontrager wheels. - Sold in packs of three for easy upgrades to 108 tooth engagement - Use 3 pawls/springs for 54 tooth engagement - Use 6 pawls/springs for 108 tooth engagement - Springs sold separately

Upgrade or refresh your Bontrager wheels. - End cap for Bontrager Rapid Drive 108 hubs - Sold individually

Original equipment specifications - Stainless steel construction - Sold individually

Repair or refresh your Bontrager seatpost. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek genuine replacement parts have you covered. PRODUCT DETAILS - Replacement cartridge unit for Bontrager Line Dropper 31.6mm seatposts - Regular maintenance will help maintain performance and e/tend lifespan - Cartridge assembly includes bump stop and locknut - Refer to Service Manual for assembly instructions and service

Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Details: - Replacement cartridge units for Bontrager Line Dropper seat posts - Be sure to use the correct size cartridge for the respective amount of travel - Regular maintenance will help maintain performance and extend the lifespan

- Install this in line to your shift housing for precise tension adjustments - Compatible with all 4mm shift housing - Allows for 3.5mm of adjustability - Indexed movement prevents any accidental or unintentional adjustments - Compact design only adds 14mm to housing length